I have a new AG indoor model that has worked flawlessly for a few days. Out of nowhere the unit is going through a crash and reboot cycle of various lengths between 2 minutes and 20 minutes. Tried rolling back from 3.1.9 to 3.1.4; this did not help. Tried telling the unit to not connect to the servers during the WiFi setup; again this did nothing to help. I’ve flashed only from the web-based tool, I am not trying to compile anything on my own. I have attached the serials log capturing a pretty quick crash and reboot right after setup. Crash and reboot should be about 3/4 the way down. Please let me know how I should precede. A catastrophic hardware failure only after a few days rendering a unit unusable is pretty sad. -EM