AirGradient Forum

AirGradient Go: Various points

#1

Hi,
Various points that are on my mind regarding the AirGradient Go:
• “AQI LED”: For me, even the “Dim” setting is still too bright to use in the bedroom at night.
• Is there a changelog for firmware updates?
• The “altitude” seems not to be reliable. For several days, it showed approx. “-41 m”. Now, always in the same location, it jumps around within a range of 10–20 m.
• The temperature seems to be too high. (I know calibration hasn’t been implemented yet, but it’s a little bit annoying :wink: )
• At the moment, no Home Assistant support? What is the timeline for this? (I’m really looking forward for this)
• I would like to have the “Mode” setting in a more easily accessible menu position, as already mentioned in the forum.
• Sometimes I have sync issues between what is shown in the app and on the Go’s display. In those cases, I have to close the app and reopen it to get the current values.
• I’d like to be able to configure whether I receive an “offline sensor notification” email or not.

best regards
Tom

#2

Hi @Tom_BS, welcome to our community, and thank you so much for your comprehensive feedback!

  • Please find the firmware changelog here: Releases · Open-Air-Foundation/firmware-core · GitHub
  • The AirGradient Go in Stationary Mode (Wi-Fi) now supports Home Assistant. Make sure your Go firmware and your HA are the latest versions. There are still a few configuration issue which makes HA not discover the Go sometimes. Reflashing firmware with ‘Erase device’ checked is a temporary workaround. We are waiting for the fix to be implemented on the HA integration side.
  • Regarding the ‘Mode’ settings, as you might already have seen, it was discussed in the forum. We decided to revise the UI, and the Mode settings will be significantly more accessible. It will be delivered in a future firmware.

For the other points I haven’t given you more details on, please let me consult our team so I can provide you with accurate answers. I will let you know once there’s an update.

  • Regarding the app sync issue, I can take a look at this and report it to the developers. Would you mind elaborating more about this (e.g. exact step to reproduce the issue, OS version, hardware (your phone). Some additional screenshots would be great.

Thank you!

#3

Hello,

Thanks for the feedback. :grinning:

Maybe it is possible to add the changelog link to the firmware update site? I think a lot of people are curious what has been changed.

I switched the Airgradient Go to “stationary” Mode and it appeared in Home Assistant without further actions. Nice.

I observed the following in the Home Assistant Core Logs with a lot of entries:

Logger: homeassistant.components.rest.data**
Quelle: components/rest/data.py:217**
Integration: RESTful **
REST request to [http://”Airgradient GO IP-Address”/properties/report returned status 404 with text/html response: Nothing matches the given URI**

Best regards
Tom

PS: Sorry, the text above should not be bold.

#4

Hi @Tom_BS, sure! Thank you for your feedback about adding the changelog to the firmware site. We will add it to that page.

Regarding the AirGradient Go on Home Assistant, does it work normally, but the error log still shows up? Or is there a functionality breaks? Thank you in advance!